The Troy Lee Designs T-Bone Knee Guards are super lightweight and easy to wear protection.
A triple layer of stacked protection (EVA, TPR and memory foam) works together offering protection far superior to the weight of the product.
T-Bones from TLD will protect your knees when you run out of talent, and give you the confidence to ride at a higher level.
Key features:
- Molded EVA outer shell with ballistic nylon cover
- Knee cup consists of a combination stack of EVA, TPR and memory foam
- Ergonomically contoured with 2 elastic Velcro closures and internal silicone grippers
- Lightweight and low profile
- 1x Pair
- CE certified to EN13688:2013
Fitting instructions TLD T-Bone Knee Guards
Take measurements 10 cm above the knee CENTER for Lower Thigh measurement and 15 cm below knee CENTER for Calf measurement. Measurements should fall into one of the following size categories:
| T-Bone Knee Guard Size | XS/S | M/L | XL/XXL |
|
|
15-17" | 16.5-18.5" | 18-21" |
|
|
13-14.5" | 14.5-17" | 15-18" |
|
|
70-140 | 140-180 | 180-220 |
|
|
32-63 | 63-82 | 82-100 |
The knee pad should not be loose in any area. Make sure there are no gaps between pad and leg, and the openings are snug. The kneepad foam padding shall be placed directly over the kneecap
Cleaning Instructions
Hand wash cold only. Do not dry clean or bleach. Drip dry. Do not clean your protective gear with anything but soap and water. Do not use any abrasive cleaners or pads. Do not use hot water or chemical cleaners or any solvents which contain petroleum-based products like benzene or gasoline on your protective gear. Your protective gear can be weakened by these substances and may not provide its intended protection in an accident, which can result in serious injury or death. Do not use hair dryers or heaters to dry your protective gear.
Description
The Troy Lee Designs T-Bone Knee Guards are super lightweight and easy to wear protection.
A triple layer of stacked protection (EVA, TPR and memory foam) works together offering protection far superior to the weight of the product.
T-Bones from TLD will protect your knees when you run out of talent, and give you the confidence to ride at a higher level.
Key features:
- Molded EVA outer shell with ballistic nylon cover
- Knee cup consists of a combination stack of EVA, TPR and memory foam
- Ergonomically contoured with 2 elastic Velcro closures and internal silicone grippers
- Lightweight and low profile
- 1x Pair
- CE certified to EN13688:2013
Fitting instructions TLD T-Bone Knee Guards
Take measurements 10 cm above the knee CENTER for Lower Thigh measurement and 15 cm below knee CENTER for Calf measurement. Measurements should fall into one of the following size categories:
| T-Bone Knee Guard Size | XS/S | M/L | XL/XXL |
|
|
15-17" | 16.5-18.5" | 18-21" |
|
|
13-14.5" | 14.5-17" | 15-18" |
|
|
70-140 | 140-180 | 180-220 |
|
|
32-63 | 63-82 | 82-100 |
The knee pad should not be loose in any area. Make sure there are no gaps between pad and leg, and the openings are snug. The kneepad foam padding shall be placed directly over the kneecap
Cleaning Instructions
Hand wash cold only. Do not dry clean or bleach. Drip dry. Do not clean your protective gear with anything but soap and water. Do not use any abrasive cleaners or pads. Do not use hot water or chemical cleaners or any solvents which contain petroleum-based products like benzene or gasoline on your protective gear. Your protective gear can be weakened by these substances and may not provide its intended protection in an accident, which can result in serious injury or death. Do not use hair dryers or heaters to dry your protective gear.
We ride what we sell.
We ride and test every brand that we sell. We even have a race team who test parts and bikes to their limits, so we know what's truly good and can withstand UK riding conditions. We are all riders here at Wheelie, so if you have a question or want a recommendation, we are here to help.
Real reviews from real riders.
What riders are saying.
Troy Lee Designs T-Bone Lightweight Knee Guards/Pads
£79.99
