Contents Per Pack:
- 2x PRO Tyre Inserts
- 2x 44mm Rimpact Unblockable Valves
Rimpact PRO is Rimpacts most protective insert. It utilises an Energy Sensitive layer in conjunction with Rimpact ORIGINAL Foam to harden on impact and dissipate extreme forces agross itself and the foam below rather than into the rim. The material remains supple and malleable meaning its easy to install yet when it counts, Rimpact steps it up maximum protection mode and allows you to ride it out when there's no easy line choice!
Rimpact must be used in conjunction with this valve design.
Suitable for rims with an inner diameter of 23mm - 35mm and tyre widths 2.3" - 2.6". It is possible to use the insert with narrower or wider tyre but it will increase the difficulty of fitting. Do not purchase if your rims are out side of this spec.
Use about 25% more sealant than recommended on the bottle to ensure the extra surface area of the insert is coated with plenty of fluid to spare. Our inserts are closed cell and cannot absorb liquid however some sealant will cling to the outside of the insert requiring a slightly higher dosage. It can be injected through Rimpact Valves or poured directly into the tyre.
Weight: approx 160g per insert for 29", 150g approx for 27.5"
Please follow installation instructions prior to fitting/removing.
Disclaimer: It is not advised to run air pressures outside that of the tyre manufacturers recommendations. Failure to do so may result in injury or the premature failure of the bicycle. Rimpact does not accept any responsibility for misuse of the Rimpact insert or improper installation. Rimpact Inserts are designed to work WITH Rimpact unblockable valves.